Our Indian sales network gas generators, gas sensors, electrochemical, hydrogen sulphide, chlorine, gas data logger, calibration, calibration gas cylinders,hydrogen chloride, oxygen monitors, hydrogen cyanide, India, spancan N and equipment, bromine, ammonia, waste water, ozone, spantech, ACD, nitrogen, arsine, phosphine, Hydride gases, Nitrogen, Argon, Oxygen, Rare gas purifiers,  aeronex,  helium, argon, krypton,

       The leading company in India for high specification calibration gas and gas monitoring solutions

The QuickCheck range - The QC 50 and QC 100

Low-cost disposable system with disposable vials, for ammonia, toluene, hydrogen chloride and Hydrogen sulphide H₂S bump tests.

QC50 -  Full set from 150 USD - each vial gives up to 8 hours gas. Low-cost disposable system with disposable vials, for ammonia, toluene, hydrogen chloride and Hydrogen sulphide H₂S bump tests.

The QC-50

Click here for PDF data-sheet

The QC-50 from Advanced Calibration Designs provides a quick and easy method of checking the performance of gas detection systems.  The QC-50 utilizes revolutionary technology allowing a functional check (or "Bump Test") as needed or required by law.  The unique QuickCheck Vials (QCV) utilizes a stable, safe and reliable delivery method allowing ease of shipment, storage and use.  The QC-50 is currently available for ammonia and hydrogen chloride.

The QCV used in the QC-50 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner amoule.  Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas.  Simply squeezing the hand aspirated bulb will allow a test concentration of gas to flow by the gas detector, verifying its operation.

The QC-50's features include:
 

The QC-100

Click here for PDF data-sheet

The QC-100 from Advanced Calibration Designs provides a quick and easy method of checking the performance of gas detection systems.  The QC-100 utilizes revolutionary technology allowing a calibration functional check or "Bump Test" as needed.  The unique QuickCheck Vials (QCV) utilize a stable, safe and reliable delivery method allowing ease of shipment, storage and use.  The QC-100 is currently available for ammonia and hydrogen chloride as well as ppm ranges of hexane and toluene.

The QCV used in the QC-100 are small, disposable vials with a small amount of the gas to be tested in liquid form in a sealed inner ampoule.  Breaking the inner ampoule allows the liquid to absorb into a filter which then diffuses out the gas.  The motorized pump in the QC-100 provides a continuous output of calibration check gas, and the needle-valve allows users to adjust the amount of gas being generated.  This gas concentration can be checked against a calibrated instrument for higher accuracy, or simply used as a bump test device.

The QC-100's features include:
 

Send mail to spancan@cal.vsnl.net.in with questions or comments about this web site.