A New Range of
Test Products for Gases for use by Instrument Engineers
TPI 714 - Hand held flue gas analyser with NOX
TPI 715 - Five units in one, includes high
CO and NOX combustion analyser
PDF of full TPI brochure
combustion flue gas analyser CO 02
Home page
The latest in hand-held instrumentation is now available to
users to check and monitor their fuel efficiency for flue gas analysis. The
accessory in the form of portable, battery operated recorder via infra red
signals, allows immediate installation and operation without any cables or AC
mains connections on site. An optional hard copy recorder printout gives
immediate details of all relevant data, with the enough memory to store data
from up to ten sampling locations. The data can later downloaded on to a P.C.
PDF download for TPI 712
Combustion
Efficiency Analyser TPI 712
1.
Combustion Efficiency Analyser TPI 712 (Rs 51,000/- ex-works Kolkata)
• Measure O2 and CO
• Calculate CO2, efficiency, excess air and ratio.
• Will work with high efficiency furnaces, hot water heaters, and other
combustible gas
appliances.
2.
Combustible Gas Detector
• Set at 100 ppm sensitivity for natural gas
3. CO Analyser
• Measure 0-10,000 ppm CO
4. Differential Thermometer
• Dual input K-Type thermocouple temperature tester
5. Differential Digital Manometer
• Dual input differential manometer with 3 selectable units
of measure:
kPa, mBar, inH2O.
Features
• Easy to use
• Large, easy-to-read display
• Data log up to ten sets; timed logging 400 sets
• PC interface
• IR printer port
• Protective rubber boot included
Accessories
CO Sensor, Oxygen Sensor, Protective Boot,
Stack Probe, PVC Tubing, Water/filter trap on
Stack Probe, Sulphur Filter (installed), Shoulder
Strap Carrying Case, Spare Particle Filters,
Rechargeable Batteries with battery charger
IR link to
laptop or PC
Software to upload information to PC (extra cost)
Parameters
measured
Temperature Measurement:
Range -40° to 1472°F, or -40° to
800°C
Resolution 1°F or C
Accuracy (K-type) ±0.3%, ±2°F or ±1*C
Draft/Pressure Measurement
Selectable Ranges mBar, kPa, and inH2O
Ranges -150 mBar to +150 mBar
-15 kPa to +15 kPa
-60 inH2O to +60 inH2O
Resolution 0.01mBar
Accuracy ±0/5% fsd
Gross/Net
Efficiency Measurement
Range 0 to 100%
Resolution 0.1%
Oxygen
(O2) Measurement
Range 0 to 25%
Resolution 0.1%
Accuracy ±0.3%
Carbon
Monoxide (CO) Measurement
Range 0 to 10,000 ppm
Resolution 1 ppm
Accuracy ±5 ppm or 5%, whichever is greater
Carbon
Dioxide (CO2) by calculation
Range 0 to 25%
Resolution 0.1%, Accuracy Calculated
CO/CO2
Ratio, by calculation
Range 0 to 0.999
Resolution 0.001
PDF download for TPI 714
Our Indian sales network gas
generators, gas sensors, electrochemical, hydrogen sulphide, chlorine, gas
data logger, calibration,
calibration gas cylinders,hydrogen
chloride, oxygen monitors, hydrogen cyanide, India, spancan N and equipment,
bromine, ammonia, waste water, ozone, spantech, ACD,
nitrogen, arsine, phosphine, Hydride gases,
Nitrogen, Argon, Oxygen,
Rare gas purifiers, aeronex, helium, argon, krypton,
